crane anemometer

Special design for tyre crane,bridge testing vehicle etc large mechanical equipments IP65.

Application

Special design for Crawler crane, Truck crane, Bridge inspection vehicle etc. large lift, cantilever machinery

Major functions & features

Anemometer sensor use magnetic sensor measuring principle.Sensor data collected with high precision and reliability.Special design for heavy equipment, modern design, self-adjusting vertical angle.Wind speed measurement with wide range, low wind speed start.Wind speed sensor use metal enclosure, corrosion resistant and strong anti-wind capabilityWind cup stainless steel, can be used in harsh conditions.Compact sensor design, set wind speed measurement, heating device in one, easy installation and maintenance.Sensor fault-tolerant design, sensor will not be damaged even wrong wiring.Surge protection design.Wide supply voltage range.

Specification:

Operating voltage	VCC=DC12V-DC30V	Range	0.5-50m/s
Start speed	0.5m/s	Anti-wind level	>70 m/s
Accuracy	±0.5 m/s  (<5m/s) Measuring vale±3% (≥5 m/s)	Heating type	Automatic
Heating voltage	DC24V±6V	Heating power	≤50W
Surge protection	4KV/2KA	ESD protection	15KV
Ambient temperature	-40°C~+70°C	Relative humidity	0%~99%
Body material	Aluminum alloy/ Fluorocarbon coating	Ingress protection	IP65
Wind cup material	Stainless Steel 304	Bearing material	Stainless Steel 440C
Weight	FA13xB=2.5KG

Signal and model selection:

Model	Signal output
FA131B	UART :Universal Asynchronous Receiver/Transmitter,baud rate 300, eight bit data, no parity, one stop bit, signal range 0~VCC. Match Nanhua FA101C or FA130C display panel.
FA133B	4~20mA three-wire current loop, load resistance≤500Ω
FA135B	NPN pulse signal,  0.5m/s=2Hz, 50m/s=573Hz V[m/s]=0.08669×f[Hz]+0.32

crane anemometer