Wind Speed Transmitter

Special design for plant, electric power, harbor, factories and mines, wind generator etc large mechanical equipments,IP65

Major functions & features

Airspeed sensor, providing good corrosion resistant, strong anti-wind ability, up to 16 scale.Convenient installation and adjustment free.

Specification

Supply voltage	DC12V~DC28V	Wind speed measuring range	0~36m/s
Measurement tolerance	(0.4+0.05 actual wind speed)m/s	Toggle speed	<0.5m/s
Anti-wind strength	Max. wind resistance:≥60m/s	Sensor output	4mA~20mA; RL<400Ω
Refreshing frequency	1Hz
Ambient temperature	-30 ~ +70(degree Celsius)	IP protection	IP65
Humidity	10% ~ 95% (no coagulation)	Material	PC+ABS
Weight	0.3kg

Installation and operation

Communication cable:

Use the cable with single core diameter more than 0.5 mm(communication distance within 100m),3 cores shield cable,and if with longer distance please choose the wider diameter cable.

•    Installation: 

A , Insert the aviation socket with cables(3 cores) into the base of anemometer, and lock the screws. Make sure firm. The connect cable should be long enough to connect the  communication loop of sensor and display.

B, Install the sensor on the top of devise. And lock well it with 3 Φ6Χ16mm hex screw. Please note that the anemometer should be installed vertically, windcup at the top, fasten well and firm.

Trouble shooting

If the anemometer does not work, please check:

1,the power is DC24V ± 6;

2,PLC input resistance is less than 400Ω.

Wind Speed Transmitter